ETC Obsession User Manual page 178

178
Overall fade times
Each effect has an overall upfade, dwell and downfade time.
When you create an effect, the times default to 5/Hold/5,
(upfade of five seconds, dwell of hold, downfade of five
seconds).
Note: Dwell is how long the effect runs between the initial upfade
and the final downfade. Hold assigns an infinite dwell, meaning
the effect runs until the associated fader button is pressed,
starting the downfade.
Note: Upfade, dwell and downfade times are applied to the bump
time assignment if the effect is loaded to a submaster.
Change upfade, dwell and downfade
Keystrokes:
1. Press [Effect*].
2. Press [Effect], enter effect
number and press [Enter].
3. Press [Time], enter the
upfade and press [/].
4. Enter the dwell and press
[/].
5. Enter the downfade.
6. Press [Enter].
Change upfade only
Keystrokes:
1. Press [Time].
2. Ente the upfade and press
[/].
3 Press [Enter].
Obsession User Manual
Action/Command line
Effect 3
Effect 3 T ME 5 /
Effe t 3 TIME 5 / 2 /
Effect 3 TIME 5 / 2 / 5
Effect 3 TIME 5 / 2 / 5
Action/Command line
Effect 3 TIME
Effect 3 TIME 4 /
Effect 3 TIME 4 /