ETC Obsession User Manual page 326

326
Installing Full Tracking Backup
Full Tracking Backup (FTB) lets you connect two Obsession
consoles, using one as a backup for the other. See page 266.
Use the System keyswitch to switch from one set of electronics
to the other.
1. Connect both consoles via ETCNet. See Using ETCNet on
page 320.
2. Connect monitors to the second console. See Installing mon-
itors on page 312.
3. Set DIP switches on both consoles, as described in Appendix
B, DIP switch settings .
Note: Obsession reads DIP switch settings when you turn it
on. You must turn power off and back on for the c nsole to
recognize new settings.
Obsession User Manual