ETC Obsession User Manual page 161

Chapter 11 Submasters
Using Update to modify submasters
Update lets you modify an individual submaster's channel levels
live, then re-record the submaster without including the entire
stage look. Update only adds currently selected channels to the
individual submaster.
Note: If you update a range of submasters, new channels aren't
added to the submasters.
Note: In addition to updating a single submaster, you may also
enter a range of submasters ([Sub] [1] [Thru] [5]) or you may
update all active submasters by omitting the submaster number
([Sub] [Enter]). (Step 5, below.)
Keystrokes:
1. Press [Live*].
2. Set submaster slider to 10.
3. Select and set desired levels
for the channels to update.
4. Press [S4], Update.
5. Press [Sub], enter the sub-
master to update and press
[Enter],
or...
Press the submaster
button.
Shortcut: The easiest way to update a single submaster is to enter
new channel levels, press [Update], then press the submaster's
bump button
Note: When yo use Update to modify a submaster, control of
stage le els everts from the keypad to the modified submaster.
†
Warning: If you don't set the slider to 10, Obsession updates the
ubm ster proportionally. This means that the outputs on stage
wi l match their current level only when the slider is at its current
position.
Obsession adjusts channel levels to match slider level to accomo-
date this. When this happens, levels on stage drop to the new
levels. The console warns you before this happens.
Action/Command line:
Puts submaster's current look
†
on stage
Selects channel and sets
levels
Live: UPDATE
L ve: UPDATE SUB 8
bump
161