ETC Obsession User Manual page 55

Chapter 3 System settings
Setting default Back and Go To Cue times
You may assign a default fade time to [Go To Cue] and [Back].
When you use these functions to play back a cue, its fade time
overrides the fade time assigned to the cue. Default time is one
second for both.
Keystrokes:
1. Press [Setup*].
2. Select [1], System Settings,
and press [Enter].
3. Select [8], Default Back/
GoToCue Time,
and press [Enter].
4. Enter the value to assign.
5. Press [Enter], or press [Clear]
to cancel.
Setting default Sneak time
[Sneak] allows you to fade or re tore channel levels on stage
in a specified time. Default time i
For more information, see Sneak on page 80.
Keystrokes:
1. Press [Setup*].
2. Select [1] System Settings,
and press [Enter].
3. Select [9 , Default Sneak
Time, and press [Enter].
En er the time you wish to
assign for Sneak.
5. Press [Enter], or press [Clear]
to cancel .
Action/Command line:
Selects System Settings menu
System Settings: ENTER
DEFAULT BACK TIME:
System Settings: ENTER
DEFAULT BACK TIME: 2
System Settings: ENTER
DEFAULT BACK TIME: 2
ive seconds for a Sneak.
Action/Command line:
Selects System Settings menu
System Settings: ENTER
DEFAULT SNEAK TIME:
System Settings: ENTER
DEFAULT SNEAK TIME: 4
System Settings: ENTER
DEFAULT SNEAK TIME: 4
55