ETC Obsession User Manual page 234

234
Reading a show and system settings
When you read a show and system settings from the hard drive
and load it into memory, the new show completely overwrites the
current show, including system settings .
Fades are interrupted during the read operation; fades do not
resume when read is complete .
Keystrokes:
1. Press [Setup*] .
2. Press [4], Hard Drive Func-
tions, [Enter].
3. Use level wheel or [Next],
[Last], [Page+], [Page –] to
select show. You may also
press [S1], Select By Name,
enter the show's name on the
alphanumeric keyboard and
press [Enter].
4. Press [S5], Read All, [Enter].
5. Press [Enter] , or press [Clear]
to cancel.
Once the show information is read into memory, the screen
switches to th Live display.
Reading a show
When you read a show from the hard drive and load it into
memory, the new show overwrites the current show, but does
not affect the current system settings.
To read only the show information, follow the steps listed above,
but press [S6], Read Show, [Enter] in step 4.
Obsession User Manual
Action/Command line:
Selects Hard Disk Functions
menu
Highlights the selected show
Hard Dri e Functions: READ
ALL? P ease confirm
C nso e reads system settings,
patch and show into memory
Message appears onscreen:
Operation in progress. Please
stand by.
Command line reads:
Hard Drive Functions: READ
ALL? Please confirm