ETC Obsession User Manual page 78

78
Level
Press [1] [Thru] [5] [Level] to set selected channels to the level
assigned to the [Level] key. The default value for [Level] is 100
percent. (See page 53 to change default settings.)
Note: You do not need to press [Enter] to complete the operation.
Rem Dim
Press [1] [Thru] [5] [Full] [Rem Dim] [Enter] to set selected chan-
nels to a specified level and simultaneously set all unselected
channels to zero. [Rem Dim] does not affect submaster output.
Note: You can use [Rem Dim] without setting a level. For
example, enter [1] [Thru] [5] [Rem Dim] [Enter] to set the output
of all channels except 1 through 5 to zero and leave them at heir
current levels.
Grandmaster
Use the Grandmaster slider to control all live outp ts proportion-
ally. It does not affect parked channels, parked d mmers or inde-
pendent channels. Disable the Grandmaster n System Settings.
Blackout
Press [Blackout] to reduce all conso e output to zero. Press the
button again to restore output. [Blackout] affects parked channels
and dimmers, but not independent channels. Disable [Blackout] in
System Settings.
When you press [Blackout], Live levels appear in gray. This lets
you see that outputs re disabled, but also lets you see what
levels will be when utputs are re-enabled.
Obsession User Manual