ETC Obsession User Manual page 62

62
One-to-one patch
The one-to-one patch assigns dimmer 1 to channel 1, dimmer 2 to
channel 2 and so on. If there are more dimmers than channels,
excess dimmers are automatically patched to channel zero.
See Unpatching individual dimmers on page 67 for more informa-
tion on channel zero.
Follow these steps to select a default one-to-one patch:
Keystrokes:
1. Press [Setup*] to display the
Setup menu.
2. Press [5], Clear Functions
[Enter].
3. Press [9], Reset Patch 1-to-1
[Enter].
4. Press [Enter] to confirm your
selection of one-to-one
default patch, or press [Clear]
to cancel.
Obsession User Manual
Action/Command line:
Clear functions:
Clear functions: RESET
PATCH? Please confirm
Sets patch to default one-to-
one patch.