ETC Obsession User Manual page 70

70
Dimmer check
You may check dimmers by selecting a single dimmer and setting
it at a level. Once you select a dimmer, advance sequentially
through the dimmers checking one at a time.
Keystrokes:
1. Press [Live*].
2. Press [Dim] then use the key-
pad to enter the number of
the first dimmer.
3. Press [At] then use the key-
pad to enter an output level (1-
99 percent), or press [Full]
Note: You can also set the output level by pressing [Le el]. If you
use [Level], you do not need to press [Enter].
4. Press [Enter]
5. Press [Next] or [Last] to select
the next or previous dimmer.
Press any other key to end
dimmer check.
Note: A sample macro to automate dimmer check is on page
201.
Flash dimmer
You may use he Flash softkey in Live to flash dimmers. To flash
dimmer 1, press:
[Mo e S ftkeys] [S6], Flash, [Dim] [1] [Enter]
or
[Dim] [1] [More Softkeys] [S6], Flash, [Enter]
As long as the Flash Dimmer command is on the command line,
use [Next] and [Last] to step through the dimmers in sequence.
Obsession User Manual
Actions:
Live: DIMMER 1
Live: DIMMER 1 @ 50
Live: DIMME 1 @ 50