ETC Obsession User Manual page 221

Chapter 15 Park
Parking groups, cues and submasters
Obsession lets you park the channels used in groups, cues and
submasters.
Parking a group, cue or submaster parks all the channels at the
level indicated in the park instruction, not the recorded levels.
Park a group
Keystrokes:
1. Press [Live*].
2. Press [Group] [#].
3. Press [At] [#].
4. Press [Park] [Enter].
Park a cue or submaster
To park the channels used in a cue or submaster follow these
steps, pressing either [Cue] or Sub] respectively, in step 2.
Keystrokes:
1. Press [Live*].
2. Press [Group] [Cu ] [#].
3. Press [A ] [#].
4. Pre s [Park] [Enter].
Unpark a group, cue or submaster
To unpark the channels in a group, cue or submaster, follow the
same procedure you used to park the channels, but omit step 3
(Press [At] [#]). This unparks any associated channels in the spec-
ified cue, group or submaster.
Action/Command line:
Selects the group
Live: GROUP 5
Selects the level at which to p k
the channels in the group
Live: GROUP 5 @ 50
Parks the channe in the group at
the selected level
Live: GROUP 5 @ 50 PARK
Action/Command line:
Selects the cue to park
Live: GROUP CUE 1
Selects the level at which to
park the channels in cue
Live: GROUP CUE 1 @ 90
Parks the channels in the cue
at the selected level
Live: GROUP SUB 1 @ 90
PARK
221