ETC Obsession User Manual page 248

248
Multiuser display notes
When you use Multiuser, the upper left corner of the Live, Blind,
Sub, Group, and Effect screens displays User 1 or User 2 to indi-
cate the User to which the device is assigned. Each User may
consist of any number of devices.
Channels selected on one User's devices appear against a blue
background on the other User's device displays.
Enabling Multiuser
Before you can assign devices to User 1, User 2 or Phantom you
must enable Multiuser.
Keystrokes:
1. Press [Setup*].
2. Press [2], Input/Output
Configuration, [Enter].
3. Press [1], I/O Options,
[Enter].
4. Press [3], Multiuser,
[Enter].
5. Press [Enter] to enable
Multiuser, or press [Cle r]
to cancel.
6. Turn your syst m off, then
back on.
Obsession User Manual
Action/Command line:
Selects I/O Configuration
menu
Selects I/O Options menu
ENABLE MULTIUSER?
Multiuser is enabled
Multiuser is activated