ETC Obsession User Manual page 246

246
Reset Patch 1-to-1
Reset Patch 1-to-1 resets your console's patch to a one-to-one,
default patch. Thus, channel 1 is patched to dimmer 1, channel 2
is patched to dimmer 2, and so on. This function is independent
of your show. See Chapter 4, Patch , for more information about
patch.
To reset your patch, follow these steps:
Keystrokes:
1. Press [Setup*].
2. Press [5], Clear Functions,
[Enter].
3. Press [9], Reset Patch
1-to-1, [Enter].
4. Press [Enter].
Caution: Always back up show information and I/O configuration
information to the hard drive and/or a disket e. This protects you
against loss of data.
Obsession User Manual
Action/Command line:
Displays Clear Functions menu
Clear Functions: RESET
PATCH? Please confirm
Clear Functions: RESET
PATCH? Complete