ETC Obsession User Manual page 173

Chapter 12 Effects
Creating effects and steps
As you create a series of steps in Effect display mode, you create
an effect. When you create a new step, it defaults to the previous
step's attributes. You may then edit the step settings.
To edit a step, use the arrow keys to select an attribute field and
enter the new setting. Press [Enter] or any arrow key to make the
change. You can also use softkeys to move from field to field.
Keystrokes:
1. Press [Effect*].
2. Press [Effect], enter the
effect to create (1-999),
and press [Enter].
3. Press [1] [Enter].
4. Enter the channels, groups
and submasters you want
in the step. Submasters
must be from the first sub-
master page.
5. Press [→]. Enter step time
(0 to 99.9 seconds).
6. Press [→]. Enter the I
time.
7. Press [→]. Enter Dwell
time.
8. Press [→ Ent r Out time. Effect 1
9. Press [ ]. Enter the low
level.
10 Press [→]. Enter high level. Effect 1 STEP 1 HIGH LEVEL
11. Press [→].
12. Press [↓].
Repeat steps 4 through 12 until you have entered as many steps
as desired.
Action/Command line:
Last modified effect is displayed.
Selects a new effect; empty step
1 is automatically created, with
the elements field highlight d.
Effect 1
Effect 1 STEP 1
ELEMENTS
Effect 1 STEP 1
ELEMENTS 5 > 10 + 17
Effect 1 STEP 1
STEP TIME 5
Effect 1 STEP 1 IN TIME 2
Effect 1 STEP 1 DWELL
TIME 3
STEP 1
OUT TIME 2
Effect 1 STEP 1 LOW LEVEL
20
80
Effect 1 STEP 1
ELEMENTS
Moves to the next step
Effect 1 STEP 2 ELEMENTS
173