ETC Obsession User Manual page 193

Chapter 13 Macros
Using Learn
The Learn function lets you create a macro by performing an
actual sequence of keystrokes. Rerun the recorded keystroke
sequence by pressing the appropriate macro key. Once you
record a macro in Learn mode you can edit the sequence in Macro
mode.
Keystrokes:
1. Press [Live*].
2. Press [Learn].
3. Press [Macro] [7] [Enter].
4. Enter [1] [Thru] [5] [At] [5]
[Enter].
5. Press [More Softkeys] [S7],
Macro Wait, [5].
6. Press [Enter].
7. Enter [1] [Thru] [1][0] [Full]
[Enter].
8. Press [More Softkeys] [S7]
Macro Wait, [5].
9. Press [Ent
10. Enter [1] [Thru] [1][0] [Out].
11 Pre s [Store Macro].
12 Press [M7].
Note: Learn works in any display mode.
Action/Command line:
Live: LEARN
Learning Macro 7 flashes
above the command line
Live: LEARN MACRO 7
Sets channels 1 through 5
at 50 percent
Live: CHAN 1 > 5 @ 50
Inserts a five second wait
into the ma ro
Live: CHAN 1 > 5 @ 50
MACRO WAIT 5
Liv CHAN 1 > 5 @ 50
Sets channels 1 through 10
t Full
Live: CHAN 1 > 10 FULL
Inserts a five second wait
into the macro
Live: CHAN 1 > 10 FULL
MACRO WAIT 5
Live: CHAN 1 > 10 FULL
Sets channels 1 through
10 at zero
Live: CHAN 1 > 10 OUT
Concludes macro recording
Macro 7 runs. Channels 1
through 5 rise to 50 percent.
After five seconds, channels
1 through 10 rise to Full.
After five seconds, levels
drop to zero
193