Table of Contents
Advertisement
Example
This shows protocol group 1 configured for IP over Ethernet:
Console#show protocol-vlan protocol-group
ProtocolGroup ID
------------------ ------------- ---------------
Console#
show interfaces protocol-vlan protocol-group
This command shows the mapping from protocol groups to VLANs for the selected
interfaces.
Syntax
show interfaces protocol-vlan protocol-group [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-32)
Default Setting
The mapping for all interfaces is displayed.
Command Mode
Privileged Exec
Example
This shows that traffic entering Port 1 that matches the specifications for protocol
group 1 will be mapped to VLAN 2:
Console#show interfaces protocol-vlan protocol-group
Port
ProtocolGroup ID
---------- ------------------ -----------
Eth 1/1
Console#
Frame Type
1
ethernet
Vlan ID
1
Protocol Type
08 00
vlan2
4
VLAN Commands
4-243
Advertisement
Table of Contents
Need help?
Do you have a question about the 8126PL2-F - annexe 1 and is the answer not in the manual?
Questions and answers