Input Terminal Block - Omron ZW-XC7 User Manual

24 V input terminal block
Used for 24 VDC power supply.
Compatible cable specifications: Solid wire 0.2 to 2.5 mm
1
Remove 24 V input terminal block from the Sensor
Controller.
2
Insert the wire in to the terminal hole.
•When you use a wire attached rod terminal,
you can insert just with Push-IN.
ZW-7000 User's Manual
2
Stranded wire 0.2 to 2.5 mm
Stranded wire with rod terminal(no plastic sleeve) 0.25-2.5 mm
Stranded wire with rod terminal(with plastic sleeve) 0.25-2.5 mm
AWG 24-12
Pin processed length 10(±0.5) mm
No. Signal name
1 DC24V ( - )
2 DC24V (+)
Class Name
Power Supply DC24V (+)
DC24V ( - )
Basic Operations for Displaying Measurement Results
2
Description
Terminal for external power supply (24 V)
Terminal for external power supply (0 V)
2
2
29