Right Paper Tray Guide Assembly; Removing The Paper Tray Guide Assemblies - Xerox 1235DT - Phaser Color Solid Ink Printer Service Manual

Right paper tray guide assembly

Warning
Switch off the power and disconnect the power cord.
1.
Remove the electrical chassis as described in "Electrical chassis (card
cage)" on page 94.
2.
Remove the printer unit chassis as shown on page 97.
3. Remove the four screws securing the lower plate to the paper tray
guide assemblies.
4. Lift the lower metal shield plate from the right side of the metal plate
and paper guide assembly.
5. Disconnect CN1 from the low voltage power supply.
6.
Lift the lower plate and power supplies from the tray guides.

Removing the paper tray guide assemblies

106 Phaser 1235 Network Color Printer