Table of Contents
Advertisement
MACHINE OPERATIONS AND CONTROLS
Dozing mode
(A) Cutting & Carry
(B) Cutting
(C) Spreading
(D) Simple Grading
CUTTING AND CARRY MODE
You can perform smooth and efficient digging and carrying op-
erations by selecting "Cutting & Carry".
Also, you can adjust the operation of the blade automatic con-
trol by operating the blade control lever.
REMARK
In cutting and carry mode, the blade movement is controlled by
using terrain information before digging and information of the
design surface. Terrain information before digging is recorded
automatically while the machine is traveling.
OPERATION OF CUTTING AND CARRY MODE
When you start blade automatic control in cutting and carry mode, digging operation to the digging depth (a) set
in the blade load mode starts gradually.
3-38
Type of operation
Normal dozing operation
Effective dozing operation (Short
range cutting method)
Spreading operation of piled soil high-
er than the blade height
Operation to finish uneven ground, flat
ground, or slope by traveling along or
across the slope
OPERATION
Advertisement
Chapters
Table of Contents
