Table of Contents
Advertisement
MACHINE OPERATIONS AND CONTROLS
METHOD FOR OPERATING TO TRAVEL REVERSE WHILE USING AUTOMATIC
BLADE CONTROL
1.
Set the joystick (steering, directional and gear shift lever)
to REVERSE position (R).
2.
Perform RAISE trigger operation.
1)
Move the blade control lever to RAISE direction (A)
once and return it to NEUTRAL position (B).
The blade automatically rises to the certain height.
REMARK
•
While the machine is traveling or stopped, the
blade automatically rises with RAISE trigger oper-
ation. Move the blade control lever to LOWER di-
rection (C) to cancel it.
•
When the back grade mode is turned on, even if
RAISE trigger operation is performed, the blade
does not raise to specific height automatically.
3.
Drive the machine in reverse to a place where the blade automatic control starts again.
4.
Place the joystick (steering, directional and gear shift lev-
er) in FORWARD position (F), and perform LOWER trigger
operation.
HANDLE BACK GRADE MODE
1.
Press Auto/Manual switch to turn off the blade automatic
control.
3-32
OPERATION
Advertisement
Chapters
Table of Contents
