Komatsu D61EXi-24 Operation & Maintenance Manual page 24

EXPLANATION OF COMPONENTS
REMARK
• There is no priority in order between switching on/off of control box power supply and switching on/off of
starting switch of the machine.
• The control box operates on Windows® operating system.
After turning on the control box power supply, it takes approximately 2 minutes until Windows® operating
system starts and the main window is displayed. In the same way, after turning off the control box power
supply, it takes approximately 2 minutes until the main window is finished and Windows® operating system
shuts down.
(Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.)
NETWORK MODEM
(if equipped)
The network modem is a necessary terminal for 3G communication in order to obtain the satellite compensation
information via network, and connect the construction management system such as the Sitelink3D.
NOTICE
When using the network modem, Komatsu recommends using Komatsu genuine network modem anten-
na (option).
If other antenna than Komatsu genuine part is used, it may not be complied with the regulations in the
country or area where the machine is used. This is because the network modem is a wireless device
which uses radio wave.
(1) Power supply state LED
(2) Communication state LED
(3) Bluetooth state LED
3-6
(4) Antenna connecting port
(5) Connector port 1
(6) Connector port 2
OPERATION