Komatsu D61EXi-24 Operation & Maintenance Manual page 139

HANDLE CONTROL BOX
3.
On "Blade Control" screen, check "Control using single
point on blade".
4.
Press "Ok".
WHEN YOU CHANGE BLADE CONTROL POINT ON BLADE CONTROL SCREEN
When "Control using single point on blade" is selected, you can change the blade control point by using the slid-
er button or the right/left arrow on "Blade Control" screen.
1.
On "Blade Control" screen, check "Control using single
point on blade".
2.
Select an arbitrary point on the blade by moving the slider
button from side to side, or using RIGHT/LEFT arrows.
3.
Press "Ok".
This blade control point is applied to the machine.
WHEN YOU CHANGE BLADE CONTROL POINT QUICKLY
You can change the blade control point quickly while the profile is displayed on the main window.
1.
When setting the blade control point to the left end (or right
end) of the blade edge, press left end (A) (or right end (B))
of the blade edge at the top of the screen.
2.
Press "Move control left" (or "Move control right").
CONTROL MENU
AJD02632
AJD02632
4-45