Table of Contents
Advertisement
HANDLE CONTROL BOX
4.
Select all the Surfaces to be exported on "Surface(s)"
screen, and press "Next".
On "Surface(s)" screen, the list of Surfaces in the active
Project Files is displayed.
5.
Select the export method of Linework(s) included in the ac-
tive Project File on "Linework(s)" screen, and press "Next".
•
"None": Exports none.
•
"All polylines": Exports all the polylines.
•
"Selected polylines only": Exports the selected poly-
lines.
•
"Polylines by layer": Exports the polylines which are
included in the selected Layer.
6.
Select the export method of Point(s) included in the active
Project File on "Point(s)" screen, and press "Next".
•
"None": Exports none.
•
"All points": Exports all the Points.
•
"Selected points only": Exports the selected Points.
•
"Points by layer": Exports the Points which are includ-
ed in the selected Layer.
"Control data" screen is displayed.
7.
To export the Control data included in the active Project
File, tap the check box to put a tick in it, and press "Next".
NOTICE
When the Control data is exported, all Localization
File, Control Point(s), and mmGPS data are exported.
In addition, the active Project at Recipients is overwrit-
ten by Control data.
TOOLS MENU
4-63
Advertisement
Chapters
Table of Contents
