HANDLE CONTROL BOX
1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "Tools" menu, press "Sitelink3D" and "Network connec-
tion..." in order.
3.
On "Sitelink3D Connection" screen, press "Registration...".
The message "Please have your one-time Sitelink3D regis-
tration code ready. Press Ok to enter code..." is displayed.
4.
Press "Ok".
5.
By using the numeric keyboard, input the one-time regis-
tration code issued with the WebPortal of Sitelink3D, and
press "Ok".
•
When the registration of code is succeeded
The message indicating the success of registration is
displayed.
•
When the registration of code is failed
The error message is displayed.
Check the one-time registration code and press "Ok"
again.
6.
After completing the registration, hold down the power
ON/OFF and menu switch to turn off the power, and hold
down the power ON/OFF and menu switch again to restart
the control box.
TOOLS MENU
4-59