Table of Contents
Advertisement
MACHINE OPERATIONS AND CONTROLS
Select "Cutting & Carry".
1.
Hold and carry piled soil to a hole by the automatic control of the blade.
2.
When the held soil is all spread out, drive the machine in reverse.
When dropping the held soil from a high place during the cutting and carry operation, leave a pile of the
soil.
(T) Design surface
CARRY AND COMPACT SOILS
This is the method when tamping the filled place is necessary.
This method is not suitable for the operation gradually fill the hollow by piling the soil.
Select "Cutting & Carry".
1.
Hold and carry piled soil to a hole by the automatic control of the blade.
2.
After position (A) which is lower than the design surface, control the blade by using both of the automatic
control of the blade and the blade control lever.
3-56
OPERATION
Advertisement
Chapters
Table of Contents
