Table of Contents
Advertisement
HANDLE CONTROL BOX
However, when adjusting the lateral slope angle of Surface,
you are required to use the slope fixing function.
On "Adjust Slope" screen, check the check box of "Slope
locked", and display "lock mark" (1) at the "slope control key".
METHOD FOR NAVIGATING TO POINTS (POP-UP MENU)
Press a point on the main window and display the pop-up menu, and you can navigate the machine to that
point.
1.
On the main window, hold down the target point, and dis-
play the menu.
2.
Press "Navigate to point" from "Point(s)" and select the tar-
get point.
The result of navigation to the point is displayed on the
main window.
OPERATION ON MAIN MENU
AJD02698
4-101
Advertisement
Chapters
Table of Contents
