HANDLE CONTROL BOX
•
When "Managed by Sitelink3D server" is selected
The control box reads the AsBuilt data from the server.
•
When "Local as-built only" is selected
The control box manages the AsBuilt.
In this setting, the server does not renew the AsBuilt data.
You can perform the Addition/Deletion of the locally man-
aged As-Built Surface.
METHOD FOR ADDING AND SETTING AS-BUILT SURFACE DISPLAY
This function enables you to control the as-built surface of "Elevation" and "Pass Counts" displayed by the cur-
rent surface with the internal memory of the server or the control box.
1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "Control" menu, press "As-built control..." and select.
3.
On "As-built Control" screen, check that a check mark is in-
putted on "Local as-built only".
"Local" means the internal memory of the control box.
4.
Select "<new as-built layer>" on "Layer:", and press "Ok".
CONTROL MENU
AJD02620
4-41