Table of Contents
Advertisement
OPERATION
How each state LED works
For the questions about the communication, consult your Ko-
matsu distributor.
Display of the power supply state LED (1)
Lighting color
Green
Not lit
Display of the communication state LED (2)
Lighting color
Not lit
Yellow
Flashing in green
Green
Green, red
(flashes alternately)
Display of the Bluetooth state LED (3)
Lighting color
Not lit
AUTO/MANUAL SWITCH
•
While the blade automatic control is in operation, the blade moves even if the operator does not op-
erate the blade control lever.
Be sure that no person or obstacle is around the machine before turning on the blade automatic
control.
•
Blade moves in accord with the operator's operation of the blade control lever which is given the
priority while the blade automatic control is in operation. When the operator stops lever operation,
the blade automatic control restarts.
Do not release your hand from the blade control lever in order to avoid the danger immediately even
when the blade automatic control is in operation.
•
Turn off the blade automatic control and turn off the control box power supply when performing the
inspection, maintenance, moving and loading/unloading on the trailer etc. other than the operation
by "intelligent Machine Control" at the jobsite.
•
You can turn off the blade automatic control by setting the work equipment lock lever to LOCK posi-
tion.
ON
OFF
OFF
Being started up
Not being connected to the Sitelink3D server.
(No GPRS connection information is obtained)
Connection to the Sitelink3D server is established, but no GNSS compensation
information is obtained.
Connection to the Sitelink3D server is established, and GNSS compensation in-
formation is received.
Connection to the Bluetooth is not established.
k
k
WARNING
EXPLANATION OF COMPONENTS
State
State
State
3-7
Advertisement
Chapters
Table of Contents
