Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
OPERATION
You can turn on or off the blade automatic control by using the
Auto/Manual switch.
Auto/Manual switch is located on the blade control lever.
When turning on the blade automatic control
Operate the work equipment lock lever by holding the operating
portion on the top, place the lock lever in FREE position (F),
and press the Auto/Manual switch once.
The blade automatic control is turned on.
"AUTO" is displayed on the control box screen when the blade
automatic control is turned on.
The blade automatic control is not turned on even if Auto/
Manual switch is pressed when there is abnormality in the sys-
tem.
In this case, "AUTO" is not displayed on the control box screen.
3-8
Advertisement
Chapters
Table of Contents
