Komatsu D61EXi-24 Operation & Maintenance Manual page 155

HANDLE CONTROL BOX
5.
Press "Ok" on "Sitelink3D Connection" screen.
The control box is connected to Sitelink3D, and the screen
returns to the main window.
6.
Press the power ON/OFF and menu switch to display the
main menu.
7.
On "Tools" menu, press "Sitelink3D" and "Network connec-
tion..." in order.
8.
On "Sitelink3D Connection" screen, check that the control
box is connected to the Sitelink3D.
When the control box is connected to the Sitelink3D, "Sta-
tus:" is changed to "Connected to Sitelink3D !", and "Site
ID:" is displayed.
9.
Press "Ok".
Each setting item in "Sitelink3D" menu becomes Enabled.
TOOLS MENU
4-61