Control Menu; Machine Setting; Set For Connecting To Machine - Komatsu D61EXi-24 Operation & Maintenance Manual

CONTROL MENU

CONTROL MENU
You can set the machine configuration, set the as-built control, set the blade control, and calibrate the blade on
the control menu.
You can make, edit, copy, and delete the machine configuration files.

MACHINE SETTING

On "Machine setup...", you can set the Machine configuration files including "GPS Comms Configuration", "GPS
Precisions", "GPS radio configuration", and "GX-55 Light_Bars".
This setting needs to be set again only when GNSS receiver is replaced, GPS precision is changed, or setting
of GNSS radio device or base station is changed.

SET FOR CONNECTING TO MACHINE

1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "Control" menu, press "Machine setup..." and select.
3.
On "Machine files" screen, press "New...".
4.
On "Komatsu Advanced Dozer" screen, press the input
section for "Configuration name:".
5.
Input the setting name by using the alphanumeric key-
board.
6.
Press "Next".
4-38
HANDLE CONTROL BOX
AJD02614
AJD02616