Komatsu D61EXi-24 Operation & Maintenance Manual page 118

FILE MENU
3.
On "Project Surfaces" screen, press "Import...".
4.
On "Import Project Data" screen, select "What:" (Type of
file to be imported) and "Where:" (Place to save the file).
5.
Select the file to be imported, and press "Ok".
If you cannot set a surface contained in the project file as the current work, perform the following proce-
dure.
(Example) When setting the Flat Plane Surface "new_5m45deg" as current work
6.
Press the power ON/OFF and menu switch to display the
main menu.
7.
On "File" menu, press "Surfaces..." and select.
4-24
HANDLE CONTROL BOX
AJD02584