Table of Contents
Advertisement
OPERATION
13. Select the position of blade matched with the base point
on "Position check..." screen.
•
When matched with the left blade edge: "Blade: Left"
•
When matched with the right blade edge: "Blade:
Right"
14. Press "Elevation" tab and select.
15. Press the input section of "Known elevation:" and input the
elevation of the base point.
16. Press "Measure...".
The screen shown on the right is displayed.
When the bar at the bottom of the screen reaches the right
end, screen returns to "Position Check" screen.
The altitude that the machine recognizes is displayed in
"Elev". The difference between above altitude and the alti-
tude of the base point that is inputted in "Known eleva-
tion:" is displayed in "dZ".
17. Check the difference between the altitude that the machine
recognizes and the altitude of the base point, and press
"Ok".
The screen returns to the main window.
MACHINE OPERATIONS AND CONTROLS
3-27
Advertisement
Chapters
Table of Contents
