Method For Creating Sloping Surface Files - Komatsu D61EXi-24 Operation & Maintenance Manual

FILE MENU
REMARK
You can create the Flat Plane Surface by the following meth-
ods, instead of measuring the control point on "Flat Plane Sur-
face" screen.
• Method 1
Set the point saved in the internal memory of the control
box as a control point by "Set points...".
• Method 2
Directly input "Point on surface".

METHOD FOR CREATING SLOPING SURFACE FILES

When creating the sloping plane surface file, perform the following procedure.
1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "File" menu, press "Surfaces..." and select.
3.
On "Project Surfaces" screen, press "New...".
4-28
HANDLE CONTROL BOX