Method For Creating A Project File - Komatsu D61EXi-24 Operation & Maintenance Manual

FILE MENU
5.
On "Project Files" screen, press "Copy...".
6.
On "Copy files" screen, select "USBHardDisk to 3DMC
folder".
7.
Select a project file to be imported to the internal memory
of the control box, and press "Ok".
The selected project file is imported into the internal mem-
ory of the control box.
8.
On "Project Files" screen, select the imported file, and
press "Ok".
The imported project file is set as the current work in the
control box.
REMARK
• If a project file is saved already in the internal memory of the control box, select the one to use.
• When reading the Project files obtained from the Sitelink3D server, select "Sitelink3D Inbox to 3DMC fold-
er".

METHOD FOR CREATING A PROJECT FILE

When creating a new project file, perform the following procedure.
4-14
HANDLE CONTROL BOX
AJD02554
AJD02556