Table of Contents
Advertisement
OPERATION
•
When the design surface in the range of piling soil is not set, operate the blade by using blade control lever
to release the load.
METHOD FOR SCRAPING NATURAL GROUND
Natural ground scraping work is the operation to generate the inclined surface by scraping the soil on the slope.
Disable "Smooth Start" and select "Cutting & Carry".
Start the blade automatic control, and drive down the machine on the slope.
The machine automatically start the scraping.
(T) Design surface
On the slope, Smooth Start function may be enabled and the soil at back side cannot be cut and left as uncut
part. Disable Smooth Start function.
CUTTING AND CARRY OPERATION
Cutting and carry work is the operation to fill the lower place than the design surface with the soil.
There are 2 methods as follows. Apply these methods depending on the necessity of tamping the filled place.
CARRY SOILS TO HOLE
This is the method when tamping the filled place is not necessary.
MACHINE OPERATIONS AND CONTROLS
(V) Uncut part
3-55
Advertisement
Chapters
Table of Contents
