HANDLE CONTROL BOX
7.
On "GPS Comms Configuration" screen, set "Connection:"
to "UDP/IP", and press "Defaults".
8.
When the value in the figure is reached, press "Next".
9.
On "GPS Precisions" screen, input "Max. GPS errors (rov-
ing):" and "Max. GPS errors (point measurement):", and
press "Next".
10. On "GPS radio configuration" screen, select the radio infor-
mation, then press "Next".
(Example of the setting)
11. On "GX-55 Light_Bars" screen, set the display of LED indi-
cator.
•
"Top:", "Left:", "Right:"
You can set the contents displayed on the LED indica-
tors which are located at upper part and right and left
sides of control box screen.
•
"None"
The display function of LED indicator is not used,
and no LED lights up.
•
"Cut/fill", "Cut/fill left", "Cut/fill right"
Cut Fill amount (distance) at the current blade
height against the height of Surface is displayed.
CONTROL MENU
AJD02617
4-39