Table of Contents
Advertisement
MACHINE OPERATIONS AND CONTROLS
"Auto Control Disengaged!" message pops up on the control
box screen when the blade automatic control is switched from
on to off.
REMARK
The blade automatic control is not turned on while "AUTO" is not displayed on the control box screen.
Press the Auto/Manual switch again to display "AUTO" on the control box screen when restarting the blade au-
tomatic control.
When the blade automatic control is automatically turned off
The blade automatic control is automatically turned off in the
following conditions even if Auto/Manual switch is not pressed.
•
When the machine is stopped for 30 seconds or more
•
When the blade edge protrudes out of the designed range.
•
When the number of GNSS satellites from which the sys-
tem can receive the signals is decreased
•
When the radio waves from the base station cannot be re-
ceived
•
When the starting switch of the machine is turned to OFF
position
•
When there is an abnormality in the system such as open circuit, etc.
3-36
OPERATION
Advertisement
Chapters
Table of Contents
