Table of Contents
Advertisement
CONTROL MENU
When "Cut/fill" has been set, the reference height should be the one according to the automatic
best-fit blade control or the single point blade control that have been set on "Blade Control" screen.
For the automatic best-fit blade control or single point blade control, see "BLADE CONTROL".
When "Cut/fill left" or "Cut/fill right" has been set, the reference height should be the left end or the
right end of the blade.
•
"Cross-slope"
Deviation (angle) in the current inclination of blade against the inclination of the Surface is dis-
played.
When "Cross-slope" has been set, the reference should be the section view (lateral inclination of
machine).
•
"Steering x-track"
Distance from the steering polyline is displayed.
The points of reference, functions, and offsets which have been set on "Steer Indication" screen
has been displayed. For the setting method of the Steer Indication, see "STEER INDICATION OP-
TIONS".
•
"Precision:"
The displaying precision of each LED indicator can be set in 5 stages (1 through 5). For the relation-
ship between the set precision and the On-grade (green LED lighting) display width, see the following
table.
Cut/fill
Steering x-track
Cross-slope
12. After setting on "GX-55 Light_Bars" screen, press "Finish".
METHOD FOR SETTING AS-BUILT CONTROL OPTIONS
On "As-Built Control" screen, you can perform the setting of Server/Local for As-Built Control management and
Addition/Deletion of As-Built Surface.
4-40
Unit
1(Fine)
mm
±7
%
±0.5
2
3
±10
±15
±1
±2
HANDLE CONTROL BOX
4
5(Coarse)
±25
±50
±3
±4
Advertisement
Chapters
Table of Contents
