HANDLE CONTROL BOX
VIEW MENU
3DMC can display several types of screen. Each screen contains useful information.
On the main window, select "View" in the main menu, and you can operate the screens.
MAIN WINDOW DISPLAY
On "Main window", you can display "Plan", "Section", or "Profile".
METHOD FOR DISPLAYING MAIN WINDOW DISPLAY
When displaying the main window, perform the following procedure.
1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "View" menu, press "Main window".
3.
Press and select necessary displays.
The check mark of each display indicates that the display
is being displayed.
(Plan view)
A picture of the machine and the selected surface seen from
the side of the machine are shown.
(Section view)
A picture of the rear side of the blade and a lateral section of
the selected surface are shown.
VIEW MENU
AJD02741
4-75