Table of Contents
Advertisement
HANDLE CONTROL BOX
4.
On "Surface Name and Type" screen, press the input sec-
tion for "Name".
5.
Input the name of Surface files to make newly, by using the
alphanumeric keyboard.
6.
Select "Sloping plane surface" ("Surface type"), and press
"Next".
7.
Check that "Sloping Plane Surface" screen is displayed.
8.
Move the machine to point "A", and then lower the blade
edge to the control point.
9.
Press "Take a topo shot" of point "A", and measure the
point.
The coordinates of point "A" which the machine recognizes
are displayed on "N", "E", "Z" of "Point on surface".
10. Move the machine to point "B", and then lower the blade
edge to the control point.
11. Press "Take a topo shot" of point "B", and measure the
point.
The value when you draw a straight line from the point "A"
to point "B" is displayed on "Direction" and "Grade" of
"Main-fall (A -> B)".
12. On "Sloping Plane Surface" screen, press the input section
for "Grid interval" and "Crossfall Grade".
13. Input a value by using the numeric keyboard.
14. Press "Finish".
The screen returns to "Project Surfaces" screen.
FILE MENU
AJD02596
AJD02593
AJD02598
4-29
Advertisement
Chapters
Table of Contents
