Komatsu D61EXi-24 Operation & Maintenance Manual page 112

FILE MENU
1.
Hold down the power ON/OFF and menu switch (1) to turn
on the control box power.
2.
Insert USB memory (2) in which control point files are
saved into USB port (3) of the control box.
3.
Press the power ON/OFF and menu switch (1) to display
the main menu.
4.
On "File" menu, press "Control..." and select.
5.
On "Control points" tab, press "Import...".
6.
On "Import Project Data" screen, select "What:" and
"Where:".
As "What:", select the "Control point files (GC3)" or "Con-
trol data from project file (TP3)".
As "Where:", select the place where the control point file is
saved.
7.
Select the name of the file to be imported, and press "Ok".
4-18
HANDLE CONTROL BOX
AJD02568