Table of Contents
Advertisement
HANDLE CONTROL BOX
BRIGHTNESS AND VOLUME CONTROL
Hold down the Toggle main view switch, and you can display the adjustment mode screen.
Keep pressing each adjustment bar and slide it up and down to adjust the brightness of the control box screen
and to control the volume.
(1) Brightness adjustment of LED indicator
(2) Brightness adjustment of backlight of switches
(3) Brightness adjustment of screen
(4) Volume control
(5) "RETURN" button
(A) Bright, Large volume
(B) Dark, Small volume
Press "RETURN" button (5), and the screen returns to the main
window.
LED INDICATOR
The cut fill amount against the surface height, transverse slope, and the distance from the steering polyline can
be individually set and displayed on the LED indicators which are located at upper part and right and left sides
of control box screen.
For the setting method and accuracy of display, see "SET FOR CONNECTING TO MACHINE".
(1) Upper LED indicator
(2) L.H. LED indicator
(3) R.H. LED indicator
Lighting pattern of LED indicator
•
Upper LED indicator
(A) Deviation to the left from alignment, leftward slope
(B) On-grade
(C) Deviation to the right from alignment, rightward slope
•
L.H. or R.H. LED indicator
(D) Cut, slope angle is large
(E) On-grade
(F) Fill, slope angle is small
INTRODUCTION
4-7
Advertisement
Chapters
Table of Contents
