TOOLS MENU
The topographic survey recording is displayed.
(Example) Mark △ at left end of blade on main window
•
Each time you press "Take a topo shot" on the main win-
dow, the coordinate of blade position is measured and re-
corded.
Input the information of the point of "Position Details" every
time.
•
You can check the contents of "Point description:" by "De-
scription" on "Points" screen.
To display "Points" screen, press "File" and "Points..." in or-
der in the main menu on the main window.
•
Use only numerals for "Name" of point. Set the information
of the point by the comment in "Description".
•
On the main window, each time "Take a topo shot" is
pressed, "Position Details" screen is displayed.
You can change the setting of "Point description:" every
time.
WHEN SELECTING NO PROMPT
1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "Tools" menu, press "Topo survey..." and select.
4-56
HANDLE CONTROL BOX
AJD02737
AJD02644