Table of Contents
Advertisement
HANDLE CONTROL BOX
REMARK
When the "Navigate to the point" is performed, one of the left end, center, and right end of blade edge is used as
a reference point which has been set in "Point of interest :" of "Steer Indication" screen or in the Steerpoint of
the Pop-up menu.
To set or change the reference point for Navigation, see "STEER INDICATION OPTIONS" or "OPERATION US-
ING POP-UP MENU".
TOPO SHOT FOR TOPOGRAPHIC SURVEY
PERFORM TOPOGRAPHIC SURVEYS
The coordinate of the blade position can be measured and recorded continuously in certain interval or in pref-
erable timing.
TAKE A TOPO SHOT OF BLADE ELEVATION FOR TOPOGRAPHIC SURVEY IN
CERTAIN INTERVAL
1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "File" menu, press "Layers..." and select.
3.
On "Project Layers" screen, make a new layer for record-
ing topographic survey.
4.
Press "Ok".
5.
Press the power ON/OFF and menu switch to display the
main menu.
6.
On "Tools" menu, press "Topo survey..." and select.
TOOLS MENU
AJD02644
4-51
Advertisement
Chapters
Table of Contents
