Table of Contents
Advertisement
OPERATION
MACHINE OPERATIONS AND CONTROLS
Angling operation is not an automatic operation. Operate the angle switch to angle the blade.
NATURAL GROUND SIDE-CUTTING OPERATION
Natural ground side-cutting work is the operation to pull down the soil by using one side of blade.
Select "Spreading".
When pulling down the hard natural ground by using the blade automatic control, if the load is applied only one
side of blade, the blade cuts in too much and track on that side slips easily.
Adjust the operation by using both of the blade automatic control and manual blade control by blade control lev-
er.
(T) Design surface
3-61
Advertisement
Chapters
Table of Contents
