Komatsu D61EXi-24 Operation & Maintenance Manual page 146

TOOLS MENU
7.
On "Topo Survey" screen, input information.
• "Project layer for topo:"
Select the layer for recording topographic survey.
• "Log at:"
Select a blade position where you record topographic
survey.
• "Auto-Topo:"
Select "Minimum horz. distance".
• "Minimum horz. distance"
Press the input section for "Minimum horz. distance",
and then input "Minimum horz. distance" by using the
numeric keyboard.
• "Lower elevations by:"
Press the input section of "Lower elevations by:" and input the value to be offset to the Elevation by
using the numeric keyboard.
Offset the Elevation Coordinates of blade edge (of which position is measured) and save the data.
• "Topo button:"
Select "Pause/resume auto-topo".
8.
Press "Ok".
The screen returns to the main window, and the topographic survey recording function starts.
When the machine starts moving, the topographic survey recording is displayed.
(Example) Mark ☆ on main window
9.
When stopping the topographic survey recording function,
press "Tools" and "Topo survey..." in the main menu on the
main window and select.
4-52
HANDLE CONTROL BOX
AJD02754
AJD02644