Table of Contents
Advertisement
OPERATION
MACHINE OPERATIONS AND CONTROLS
DEACTIVATE AUTOMATIC BLADE CONTROL
Stop the machine or set the joystick (steering, directional and
gear shift lever) to NEUTRAL position (N).
The blade automatic control stops.
When turning off the blade automatic control
Press the Auto/Manual switch once while the blade automatic
control is turned on.
The blade automatic control is turned off.
The blade automatic control is turned off also when operating
the work equipment lock lever by holding the operating portion
on the top and placing the lock lever in LOCK position (L).
"AUTO" goes out from the control box screen when the blade
automatic control is turned off.
3-35
Advertisement
Chapters
Table of Contents
