Method For Creating Flat Surface Files - Komatsu D61EXi-24 Operation & Maintenance Manual

HANDLE CONTROL BOX
8.
On "Project Surfaces" screen, select a surface to be set as
the current work.
9.
Press "Show".
A check mark is inputted to "Show", and the content of
Surface is displayed on the main window.
When the Surface has been newly set to the internal mem-
ory of the control box, a check mark is inputted to "Show".
10. Press "Ok".
The screen returns to the main window.
11. Press the power ON/OFF and menu switch to display the
main menu.
12. On "File" menu, press "Active" and "Surface" in order, and
select.
13. Select a surface to be set as the current work from the sur-
faces list.
The screen returns to the main window.

METHOD FOR CREATING FLAT SURFACE FILES

When creating the flat plane surface, perform the following procedure.
FILE MENU
4-25