Table of Contents
Advertisement
HANDLE CONTROL BOX
10. On "Topo Survey" screen, select "Not active" for "Auto-
Topo:".
11. Press "Ok".
3DMC continues the topographic survey recording until
"Not active" is selected for "Auto-Topo:".
REMARK
There are following 2 types of topographic survey recording.
•
Topographic survey recording by minimum horizontal distance
This is useful for recording of the blade locus.
•
Topographic survey recording by fixed (time) intervals
This is useful for recording the blade edge position continuously to grasp the dispersion of the blade edge
position based on the satellite capturing position.
(The use for recording the blade locus is similar to the method by the minimum horizontal distance.)
REMARK
•
You can pause/resume the topographic survey recording
by pressing "Take a topo shot".
•
If topo shot point is not displayed when "Take a topo shot"
is pressed and pause/resume is switched, see "OPERA-
TIONS WHEN POINTS FROM TOPO SURVEY FILE IS
NOT DISPLAYED".
OPERATIONS WHEN POINTS FROM TOPO SURVEY FILE IS NOT DISPLAYED
1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "Display options" menu, press "Points..." and select.
TOOLS MENU
AJD02646
AJD02648
4-53
Advertisement
Chapters
Table of Contents
