Table of Contents
Advertisement
OPERATION
1)
Select "Default" (4) on "Blade Auto Control Gain Ad-
justment" screen and press switch F6.
"Default" is set.
•
When adjusting the gain of lift RAISE/LOWER or tilt RIGHT/LEFT individually.
1)
Select "Option A" (3) on "Blade Auto Control Gain Ad-
justment" screen and press switch F1.
On "Option A" screen, each gain adjustment value of
lift RAISE/LOWER or tilt RIGHT/LEFT when "Option
A" has been set.
2)
Select the item to adjust and press switch F6.
On this screen, it is possible to perform the following
operations with switches F1 to F6.
F1: Displays the next page. When on the last page, it
displays the first page.
F2: Displays the previous page. When on the first
page, it displays the last page.
F3: Moves to the next item (1 line below). When on
the last line, it moves to the first line.
F4: Moves to the previous item (1 line above). When
on the first line, it moves to the last line.
F5: Cancels the selection and returns the screen to "Blade Auto Control Gain Adjustment" screen.
F6: Displays "gain adjustment input" screen for selected item.
REMARK
"Adjustment value 5" to "Adjustment value 8" are not used for this machine. If these are selected and
switch F6 is pressed, "gain adjustment input" screen is not displayed.
3)
On "gain adjustment input" screen, press switches F3
and F4, and increase or decrease the adjustment val-
ues.
On this screen, it is possible to perform the following
operations with switches F3 to F6.
F3: Decreases the adjustment value by 1. If it is kept
pressed, the adjustment value decreases continu-
ously.
F4: Increases the adjustment value by 1. If it is kept
pressed, the adjustment value increases continu-
ously.
F5: Cancels the change of adjustment value and returns the screen to "Option A" screen.
F6: Changes the adjustment value and returns the screen to "Option A" screen.
MACHINE OPERATIONS AND CONTROLS
3-51
Advertisement
Chapters
Table of Contents
