Blade Control; Method For Setting Automatic Best-Fit Blade Control; Method For Setting Single Point Blade Control - Komatsu D61EXi-24 Operation & Maintenance Manual

CONTROL MENU

BLADE CONTROL

METHOD FOR SETTING AUTOMATIC BEST-FIT BLADE CONTROL

Using Automatic best-fit blade control enables blade control and reference of the whole blade elevation.
If there is a break line (a broken portion or a sharply changing portion of topography) in the design data, use
Automatic best-fit blade control to prevent the blade edge from digging in the design surface when performing
simple grading.
1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "Control" menu, press "Blade control..." and select.
3.
On "Blade Control" screen, check "Best-fit (whole blade)".
4.
Press "Ok".

METHOD FOR SETTING SINGLE POINT BLADE CONTROL

Using single point control enables blade control and reference of the selected one point on the blade.
When finish-leveling to a range where the surface is smaller than the blade width, use the single point blade
control.
1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "Control" menu, press "Blade control..." and select.
4-44
HANDLE CONTROL BOX
AJD02630
AJD02631
AJD02630